How To Use Wood Chips In An Electric Smoker? Is It Easy Or Not?

Are you looking forward to learning how to cook a delicious BBQ for your loved ones, but you don’t know where to begin?

A traditional smoker may be easy to give it a shot, but the complication of combining wood chips manually could bring you discomfort.

Why don’t you start learning how to use wood chips in an electric smoker for ease of use with the following instructions?

How Long Wood Chips Last In An Electric Smoker?

Different flavors of wood chips are made from other ingredients. Therefore, the time to burn them in electric smokers will be slightly different.

The average time it takes for 1 cup of wood chips to burn out will be about 20-25 minutes, meaning you should feed your smoker at least 2 cups of wood chips every 45 minutes.

Another approach you can use to know when to insert wood chips. It depends on the temperature measured inside. In other words, you can add wood chips to your smokers when you find out the meat’s temperature is around 140 F.

Some types of wood chips have a very fancy flavor but burn quite quickly. In this case, you can soak it in water and therefore extend the time up to 30-35 minutes per cup.

5 Steps On How To Use Wood Chips In An Electric Smoker 

Step 1

Before you turn on your electric hood, check to see whether there are any obstructions in the machine or the ventilation system. Leaving the device in the open for a long time can cause its metal shell to rust and the rubber layers to warp, which can lead to a smoky flavor of reduced quality as it is released to the outside. 

Besides, if there is an obstruction in the vents, the internal heating will fail due to a lack of heat dissipation.

You should consider investing in a lid that can increase the lifespan of the machine.

Step 2

You need to load the wood chips into the tray fully. Some new versions of the electric smokers have been equipped with a sliding feeder, which can be removed and filled in a capacity like the MES 130B or the Masterbuilt. You can remove the charger and fill it up to power.

Step 3

Replace the feeder in position and neatly empty the wood chips into the correct wood chips, which are located directly above the heater on the machine.

Step 4

Turn on the vacuum and set the temperature you want. Wait 20-30 minutes for the machine to heat up thoroughly and then add your food

Such warming is required for the machine’s system to work smoothly before adding food, especially in the winter when your device might freeze for a long time

Step 5

Please check the machine’s internal temperature every 20-30 minutes. A 10-degree error can be accepted depending on the outside wind speed. Strong winds may blow the device and can reduce the interior temperature. Thus, your dish will not have enough heat to cook

Electric smokers can usually withstand very high external temperatures. However, it is better to prepare a thermometer to check the temperature on the bottom of the machine for more safety.

The Popular Form Of Wood Chips Used For Electric Smokers

The right flavored wood chips are always indispensable for regular barbecues. These wood chips can contribute to a noticeably more decadent meaty dish.

Whether it’s smoked pork tenderloin or pork tenderloin, the fragrant wood chips burn and smoke the food, giving the dish a unique natural flavor.

For example, combining pork with some flavoring of peppermint leaves creates a sharp contrast in the taste. But how do you get the fit wood chips for your dish?

Here Is A List Of Suitable Food And Flavors That We Have Summarized.

  • Red meat, wild animals: Walnut wood chips
  • Beef, pork, and salmon: thick, long-lasting, slow-burning wood chips
  • Ribs and goat meat: Hickory wood
  • Cherry wood: Beef, Pork, Salmon
  • Applewood: chicken, duck, bird
  • Mesquite wood chips: Dark color, deep flavor, quite an odor, suitable for most red meats but especially smoked veal
  • Pecan wood: cold, fresh, ideal for smoked marine fish
  • Old wood chips: sweet and light, suitable for fatty meats such as beef thighs, beef belly
  • Maple Wood chips: combined with many other flavors, forming a synthetic taste to get the best smoke smell
  • Digging wood chips: Like the above, it can combine to make up the smell of other wood.

Here Are The Top 5 Wood Chips That We Use The Most:

  1. Zorestar Wood Chips 
  2. Western Premium BBQ
  3. Jack Daniel’s Tennessee Whiskey Barrel 
  4. Bear Mountain BBQ 
  5. Oklahoma Joe’s Hickory Wood Smoker Chips


Learning how to use wood chips in an electric smoker is a great experience.

You will have to spend a considerable amount of time and energy to master the skills of using wood chips, but it’s a beneficial experiment in terms of both knowledge and skills in the art of cooking.

Learn it with all your passion for food, and you will be successful soon.

How to Tell If a Paracord Will Hold a Hammock

Hammocks cannot work without suspension kits. The suspenders hold the devices above the ground. But what happens when you forget your cords at home? Is it the end of the world? It does not have to be if you have a paracord in your backpack.

What Is A Paracord?

A paracord is a rope made from nylon or polyester. It is a cord used by military personnel on parachutes. The most common variant is the 550 paracord. Other deviants include the nano, micro, type 1, 275, 325-1, 325-3, 425, 650, and 750 classes. Did you know the strength of a paracord lies in its thickness? Well, the 750 variant can support heavier loads than the nano type.

Is The Rope Ideal For A Hammock?

The rope is perfect for static loads. It stretches when exposed to a load, light or heavy. Also, it is not thick enough, meaning the rope twists and turns with every sudden movement. However, the cable always proves those who cannot tell; Will Paracord Hold a Hammock wrong. So, how do you tell if the rope suffices to support your weight? Follow the tips below.

If The Rope Is Thick Enough

Manufacturers use nylon and polyester to produce the paracord. Nylon stretches when exposed to a lot of weight and moisture. It might be impossible for you to harness your hammock in normal “woodsy” circumstances.

However, you can weave the thin paracord lines into one thick web. A thick rope stretches less and is stronger. It can, therefore, hold your weight down provided you do not make any sudden movements.

The nylon used to produce paracord is also robust. It is when the material gets woven into fibers that it becomes unbreakable. What an incredible hack!

Is The Strand Dry Enough?

Paracord can disappoint you when wet. Recall, the rope gets produced from nylon, and nylon stretched when wet. Even worse, the material loses 15% of its strength when exposed to water.

So, does that mean you will sleep on the forest floor because you did not carry the right props with you? Hell, no. Drying the rope under the sun or fire can reverse the situation. However, never place the paracord too close to the flames. It might burn!

Always inspect your rope for signs of physical damage before use. Nylon ropes are prone to abrasion when wet. You must, therefore, protect your paracord from sharp objects, given that the equipment might be useful in years to come.

If It Is Short Enough

Many camping experts do not agree that paracord is a useful support kit because of its elasticity. They paint the rope in a bad light, not realizing that it can become a beacon of hope when in the wild. Paracord stretches when carrying a load because of the nylon fibers.

But did you know that you can use such a disadvantage for your profit? Keeping the rope short and taut is the sure most way of propping up a hammock. Remember, the platform will stretch because of the nylon anchors. Anyway, the short rope prevents excess elasticity.

The Rope Is New 

An old rope loses its glory with age. Too much exposure to the elements favors a lot of wear and tear. You should not, therefore, use a paracord in such circumstances. Doing so places your life in danger.

Anyhow, a new rope can serve your interests better. Not only is the paracord safe for use but also healthy enough to hold a few pounds above the ground. It is a durable option, the perfect life-saver.

 Selection Based On Type

Paracord comes in different sizes. The 750 paracord is:

  • Bigger and better than the 550 variant
  • The most durable tactical paracord available today
  • 26% percent stronger than the 550 paracord

In short, the 750 paracord is robust enough to serve your needs. It has a thick diameter meaning it can support a more significant load. Rope thickness also prevents the hammock from swinging uncontrollably. From the look of things, you can tell that a paracord will hold a bed depending on its type.


A lot of mystery surrounds the paracord and hammock. Skeptics believe that such rope cannot support a platform because of its elasticity. Research, however, proves that a paracord is stronger than the conventional line.

Also, it is flexible enough to fold into a small package. It is because of its flexibilities that you are likely to end up with the paracord in your backpack. It is the real deal saver after forgetting your hammock support kit at home.

Besides, working with a new strand is better than using an old one. Recall, an old rope may have weak points resulting from years of abuse. Thus, new strands make the best option.

From the look of things, a paracord can work wonders for you. All you must do is become innovative and create a rope thick enough to support your weight. Above all, ensure you do not make unnecessary movements when on the hammock. The paracord only accommodates static loads.

Top 3 Advantages of Sticking to the Manufacturer’s Hammock Weight Limit

A night outdoors is better than time spent on the inside. City life is no longer exciting. Urban dwellers suffer physical and emotional abuse because of running a boring routine. It is because of the reason above that camping is now a sought-after activity. The event allows people to vent, unwind, and relax.

Research by NPD Group Inc. shows there has been a rise hammock in sales over the years. The upsurge comes because of cultural and lifestyle changes. Many young people now embrace hammocking as a hobby.

The Science Behind the Hammock

The hammock helps outdoor enthusiasts find a good night’s rest when camping. With a wide selection on display, choosing the right sleeping platform is never easy. That is why it is vital you carry a checklist with you.

An excellent checklist helps you find the right component at an affordable price. It also helps you buy the ideal gear; a platform that can accommodate you without exceeding the manufacturer’s hammock weight limit.

What is the Weight Limit?

Everything, including the hammock, breaks when exposed to too much weight. The weight limit gets stamped by the manufacturer onto the product. It denotes how much safe weight the component can carry without breaking apart.

This limit varies from one product to the next. Most hammocks support a maximum load of 350 pounds while others carry weights not exceeding 450 and 600 pounds. It all depends on what you want.

Benefits of Watching the Weight Limit

A hammock provides you with comfort and safety when camping. Anyhow, the component can only serve your needs when used according to manufacturer guidelines. So, why is adhering to the weight limit beneficial?

It Guarantees User Safety

There is only so much weight a suspended sleeping platform can carry. Some beds, for instance, accommodate a single user. Other devices support two people. You, by watching the weight limit prevent the platform from breaking apart.

Sticking to the guidelines also averts injury and death. Recall, most platforms can only support a weight capacity of 300-600 pounds. Anything beyond that puts user safety in jeopardy.                  

Second, hammocks protect campers from extreme weather elements. They shield users from savage animal attacks. Therefore, a broken bed exposes you to life-threatening risks, which is why you must adhere to builder specifications. You should go for a variant with bigger load capacity. The platform will suffice when you gain some extra pounds.

It Minimizes Losses

Product manufacturers dish out manuals to consumers. The layouts protect the builder from lawsuits started by careless users. Consumers also learn how to prop up and use the camping apparatus well. It is a win-win for all. Hammock users that follow manufacturer guidelines:

  • Promote hammock longevity
  • Prevent premature property damage
  • Minimize financial losses
  • Protect themselves from physical injury

Abiding by the weight thresholds shields you from extreme financial losses. Recall, builders do not reimburse money on intentional product damage. It is, therefore, better to be safe.

To Promote Durability

Hammocks are not cheap. The best versions cost a fortune. Anyhow, that does not mean that you should not go for more economical derivatives. Durability depends on how best you use the equipment.

Too much weight cast on a hammock, cheap or expensive, exposes the apparatus to physical damage. You must, therefore, dig deep into your finances to have the equipment replaced.

But that does not have to happen. Proper gear use enhances durability. It is something you can master fast by reading through the user logbook. Determining the right weight for the equipment is an added advantage.

Aspects That Will Help You Stick To the Limit

Suspension techniques and hang angles affect weight limits. Harnessing a 10-foot hammock between trees that are 9-feet apart hurts the weight limit. To avert this, you need to holster the device between stamps that are 10-feet apart.

It is also best you hook the hammock on a tree stump, 6 inches wide. But there is more. You must suspend the device at a 25-degree angle. Doing so stabilizes the load and prevents you from exceeding the hammock’s carrying capacity.

Hammock Storage

Store your apparatus, as stated in the logbook. Proper storage fosters durability by protecting the hammock’s woven pieces from physical damage and rotting. A cold and dry room works best.


A hammock should serve you for years. Anyway, many campers shop for new gear every year. The cycle continues because of poor user practice contributed to by ignorance. But that can change.

Consumers must learn how to adhere to manufacturer manuals. They must abide by the rules detailed out in these layouts. Sticking to the set weight limits prevents property damage, protects the consumer from financial losses, and enhances durability.

In a nutshell, even the cheapest hammock versions are durable. It all depends on how you use the gear. Excellent equipment care is not a choice; it is a requirement!

Smoking Tuna. The Ultimate Guide

Tuna. A really great tasting fish. And, it can even taste better if you are going to smoke it. However, then you should smoke it correctly.

Tuna is expensive in some countries, so if you have tuna and you are thinking about smoking it, you need to make sure that you are going to have the best tasting, smoking tuna.

With this guide to smoking tuna, you will be able to smoke it correctly, and you will have tuna that you and your whole family will enjoy.

Can You Smoke Tuna Just Like Other Meat?

The first thing that you might think, is that tuna will be difficult to smoke. This is because of the texture of the fish, and smoking can make it difficult to handle.

However, this isn’t completely true. Yes, the tuna has a different texture than meat, but with the right preparations, you will have tuna that can be smoked correctly.

And, the steps of smoking tuna aren’t really different from smoking any other type of meat. Only the time needed for smoking might be different.

The Type of Tuna That You Need for Smoking

If you don’t have the right piece of tuna, then you aren’t going to have the best tasting smoked tuna.

First of all, the tuna should be of high quality. This is the only way to ensure that you are going to have the best-tasting tuna.

When you have a large piece of tuna, it is recommended that you should slice it in thinner pieces of tuna. Like steak. This will make the smoking process faster and more effective. Just make sure that the pieces you are slicing, isn’t too thin.

Then the fish can fall apart when it is smoked. If you don’t have tuna, you can always make use of Yellowfin. This will give you the same taste and is just as easy to smoke.

Essential Ingredients That You Will Need

There are a couple of essential thing and ingredients that you need in order for you to smoke your tuna correctly. Without these things, the end result will just not be the same.

The first thing is your smoker. It can be any type of smoker, as long as it is able to smoke different wood flavors. This is where the second essential thing comes in.

The wood chips that you need to use should be peach or cherry wood. This is going to give a much better taste to the smoked tuna. Other wood can be used, but this isn’t recommended if you want the best tasting, smoking tuna.

The spices for the tuna rub are also important. You should just make sure that you know what spices you want in the rub, or you should consider using spices like rosemary, salt, brown sugar, black pepper, and lemon juice.

There are also people that are using white wine as well. This is just a guideline. You can basically add any spice you want.

Guide to Smoke Tuna Correctly

This is the guide on how to smoke your tuna correctly so that it is full of flavor and has a great smokey taste.

  • Prepare your tuna as said earlier. Slice tuna in thinner slices, but not to thin. Rub the tuna with the spices you decided on.
  • Preheat your smoker and make sure that you use the recommended wood chips. The peach or cherry wood. The temperature should be between 190°F to 200°F for smoking tuna.
  • Place the tuna directly onto the grill. Don’t put them in a pan first. It won’t get the right smokey taste.
  • When you see that the tuna became flaky, then it is ready. The time that you need to smoke your tuna will depend on the thickness of the tuna, and the amount of tuna you have in the smoker. But, normally smoking will take between 1 to 2 hours. Don’t over smoke them.
  • Serve them while they are still hot, for the best taste.

Last Tips to Remember When Smoking Tuna

You should remember that tuna and other fish don’t want to be over-cooked. This is going to make the fish dry. Even, if you are smoking the fish.

The tuna should be of high quality, to get the best flavor and taste. Cheap tuna that you might think is a bargain, will not have the same taste. The fresher the fish, the better.

With the smoker, it is essential to use peach or cherry wood chips. This will give a sweet taste to the tuna. Making it taste different than just grilling it on your griller.

Smoked tuna is delicious. Especially, if you love eating tuna in general. With this guide, you will know for sure that you are going to have the best smoking tuna, with the best flavors.

And, you will know that it is important not to over smoking it.

How to Make Bacon Jerky

We all love beef jerky. It is a great snack and the best thing to enjoy when you are watching a movie. And, who doesn’t love bacon?

Bacon for breakfast and even for dinner if you like. What if I tell you that you can combine these two great things, and have bacon jerky? Then, you won’t have an excuse for eating bacon anymore.

Now you can enjoy bacon all the time. As bacon jerky.

This is everything you need to know about making your own bacon jerky. This isn’t as hard as what you might think.

Can You Really Make Bacon Jerky?

We know that there are all kinds of jerky, and they are tasting all great. But, can you really make your own bacon jerky? Isn’t this a procedure that is complicated and that is going to take long to make?

This is good news. You might need a couple of things, but you can make your bacon jerky in no time. And, you don’t need to have a huge variety of things.

And, it isn’t as hard as what people might think. The moment that you know how to make it correctly, you will realize that this is something that you can make all the time.

What Will You Need in Order to Make Bacon Jerky?

There are two things that you need to have with you in order to make bacon jerky. The first one is for sure bacon strips. The second thing that you need in order to make bacon jerky is a smoker.

It can be any type of smoker from a charcoal smoker to your electric or gas smoker. However, without a smoker, you will not be able to make the bacon jerky correctly. This is the secret to making this type of jerky.

The smoker is essential. You would think that the bacon is already smoked, so need to smoke it again. However, this is another level of smoking.

Tips That You Need to Know Before You Make Bacon Jerky for the First Time

Something that is important, is to remember these tips. This is the key to making bacon jerky successful. There are many people that try to make bacon jerky, but they are failing. Mostly because they didn’t remember these tips.

The first thing that you should remember is that you should purchase the normal cut bacon. The thick cut won’t work correctly. And, the thin cut will cook way to fast, and will not have the right, jerky taste. The bacon should also be of high quality.

If you are one of those that are keeping your bacon frozen, you need to defrost it correctly. Half defrosted bacon can be dangerous to eat. It should be at refrigerator temperature before you can start making your bacon jerky.

Step by Step Guide in Making Bacon Jerky

With this guide in how to make bacon jerky, you will not make any mistakes in making the perfect jerky. This is the best and easiest way that you can make your bacon jerky in no time.

  • Prepare your meat. Therefore, you will need to have a dry rub. This is some spices that you are going to mix together and rub on the bacon. The type of spices doesn’t matter. You can use your favorite spices mixed together.
  • Getting your smoker to the right temperature. This is an essential step. You should not start smoking the bacon before you have reached the right temperature. The temperature should be around 190°F.
  • This is the first part of making jerky. The smoking part. This takes about 2 hours, depending on the amount of bacon you are smoking. The bacon should be far from the fire or direct heat and should always keep at the temperature mentioned. Never make the temperature higher or even lower.
  • This is the second part of making jerky. This is the cooking part that is making the bacon jerky. This is normally taking about 3 hours, and you will need your oven for this. With the oven at the same temperature as with the smoker, you should start checking the bacon after one hour of cooking. You should make sure that you check on it, to get the right texture and color. When the bacon is changing color, you will know that your bacon is starting to become jerky.
  • The last step is to remove the access oil and to store it for enjoying it when you are in the mood for jerky.

Now you can use your smoker and make your own bacon jerky.

This is something that you should try making if you love bacon and love jerky. The combination of these two will ensure that you will always have bacon jerky in your home.

And, the best part is that this isn’t a complicated process to make your own beef jerky.

How to Use Maca Root for Weight Loss

Maca is a natural herb that grows in the forest. The herb was first used by the Inca people to boost sex drive in men. The herb was also used in eliminating infertility problems in men and women.

Maca has also been recommended to assist in weight loss. The logic behind this argument is that the herb is a reliable source of energy.

How Maca Root Works:

When you don’t have enough energy, you are more likely to laze around because of fatigue. At the end of it all, you gain a lot of weight even when you don’t eat much because the food is stored as fat. The fat is only burned when you become more active.

Maca fruit is not taken in its solid form. It’s actually the root that is dried and ground to make powder that can be added into foods and drinks.

Red Maca Powder: 

When it comes to sweetness, nothing beats red maca powder and just like its name suggests, the powder is obtained from red maca roots. Due to its popularity, red maca is made from 25 percent of all the harvest that is recorded and a year.

Premium Maca Powder:  

Since each variety of maca has different health benefits, it’s expensive to buy all the types of this herb at once. It’s therefore important to settle for premium maca powder – this is made by mixing the roots of different maca plants.

When you use this blended maca, you are assured of getting all the nutrients from just a single spoon. That means you will be getting many benefits at once.

Maca Powder Dosage:

You might be desperately looking to lose weight but that doesn’t mean that you should take maca powder irresponsibly. The reality is that everything should be done in moderation. Too much of anything tends to lead to problems.

It’s recommended that you start with one spoon per day and then increase the intake gradually with time. This will allow you to judge your body’s reaction, then increase the quantity accordingly. Remember, it doesn’t work for everyone, so there is no need to dive right into the deep end before you are sure if you will get any benefits. Always consult with a medical professional before adding something like this to your regime.

You can add maca to your tea, protein shakes, smoothies and yogurt. Don’t make the mistake of adding maca to food that’s still cooking because all the nutrients can be destroyed by the high temperatures.

Why Maca Powder Rocks:   

Maca powder works by keeping your hormones in check and energy levels up.  It’s great to take before a workout, or added to your shakes.

If you have any questions, please leave a comment below!

Gin and Raisins for Arthritis

Arthritis can be a debilitating condition for many people. It’s becoming very common these days and there is a wide array of medications available.

However, one home remedy for arthritis that has been used is gin soaked raisins. I can’t tell you how or why it works. It’s one of those strange remedies that people have used with success but I have no idea how anyone ever figured it out. It could be the grapes or it could be the juniper berries in the gin.

In any event, if you’re experiencing arthritis pain and can’t find relief, try this gin soaked raisins recipe and see if it does anything for you.

How to Prepare Gin Soaked Raisins:

Firstly, you want to get the ingredients right. You’ll want to use golden raisins and gin that is flavoured with juniper berries. This is what has worked best for people. (Note that sometimes golden raisins are called white raisins as well – so those are fine).

golden raisins

It takes about a week or two to prepare these golden raisins soaked in gin, so you’ll have to be patient. Consider preparing them before you’re experiencing any pain so that they’re ready.

Take a handful of golden raisins and put them in the bottom of a bowl. A wide shallow bowl will work best. You’ll want to make sure the whole bottom of the bowl is covered but that there is only 1 layer of raisins. So depending on the size of your bowl, it could be about 100 raisins or so.

Take your gin and pour it onto the raisins until that raisins are covered, but no more than is needed to cover them. So you’ll want them to be just barely covered.

Then you can let it sit for a while. how long it takes can vary, but usually it takes a week to 10 days for the gyn to be absorbed, but can take up to two weeks as well. But the key is to wait until the gyn is gone and absorbed/evaporated.

When it’s sitting, you can cover it with a paper towel or a dish towel. Do NOT use sedan wrap or some type of lid that would seal the bowl air tight. You want air to be able to get in. The covering is just to keep things from falling in there while you’re waiting a week.

You’ll know they’re ready because the gyn will be gone. The raisins should be plump and moist. They won’t be dried out and they’ll taste good.

For effective treatment, eat 9 of them a day. This is the number I’ve seen most places, but again, there is no clear rationale as to why.

Why does it work

It’s not clear why gin raisins work, but there are anecdotal stories about their effectiveness all over the internet.

One author indicates that grapes contain proanthocyanidins, which reduce inflammation. Grapes also contain resveratrol, which is what is in red wine and gives it many of its beneficial properties.

But I can’t point you to any studies that support it, so this is definitely one of those remedies you’ll have to go on faith a bit. It seems to have gained popularity because of radio host Paul Harvey, but it’s also a bit unclear where it started (as with all remedies of this nature).

If you’ve had success with raisins in gin for arthritis, please leave a comment below!

Peppermint Oil for Hair Growth: A Guide

Peppermint oil has been used as a natural remedy for centuries. But it’s not as straightforward as just getting some leaves and rubbing them on your head. It’s actually very strong and can irritate some people’s scalp, so you’ve got to be careful about how much you use.

Overall, if you’ve got issues with your hair, it is definitely worth trying peppermint oil for hair growth. Though to be clear, it won’t work for everyone and there are a lot of different tips out there for how to use it. It’s worth trying some different approaches and seeing what works for you.

What is peppermint oil?

Peppermint oil is found on the undersides of the leaves of a perennial herb (Mentha Piperita L. and M. arvensis var . piperascensa), native to Europe. It’s a colorless, pale greenish-yellow or pale yellow liquid. It has a characteristic odor and taste.

The oil is extracted from the leaves by steam distillation. This oil is used as an analgesic, antiseptic, anesthetic, decongestant, carminative, expectorant and astringent.

How can Peppermint oil benefit your hair?

The principal ingredient of peppermint oil responsible for its beneficial effects is menthol. According to various sources, peppermint has shown anti-inflammatory, anti-fungal and antimicrobial activities. These activities help to eliminate dandruff and lice from hair and improve frizzy hair.

Advocates for peppermint oil argue that it promotes rapid hair growth, increases hair follicle number and follicle depth and strengthens hair roots. As a result, many high quality hair care products use peppermint oil as the active ingredient to prevent hair loss. It naturally thickens and nourishes damaged hair making it darker and firm.

How to use peppermint oil on your scalp:

Preparation/Making the oil:

There are various ways to prepare your own peppermint oil. Or you can just buy it already made. But if you want to start from the ground up, here’s a method we recommend. First, here’s what you need:

  • fresh peppermint leaves from the health food store or supermarket,
  • a glass jar fitted with a tight lid,
  • a storage bottle,
  • carrier oil or olive oil.

Next, in terms of the procedure you’ll want to start by cleaning the peppermint leaves. Then chop and crush them so that they release their natural oil. Put them into the glass jar and add your carrier oil. The carrier oil should cover the peppermint leaves completely. Seal the jar with a tight lid and leave it for 24 hours.

After the 24 hours are over, strain the oil, add more crushed peppermint leaves and carrier or olive oil and seal the jar tightly. Keep on adding crushed leaves and more oil into the jar for five days. Remove the leaves by straining and pour the oil into the storage bottle. Store in a cool place away from sunlight.

Here’s a video setting out some tips on how to prepare peppermint oil:

This article also has some more tips for preparing the oil.

Application on scalp: 

Peppermint oil can be used to cleanse the skin and the scalp. The inflammatory and antiseptic properties of the oil soothes your itchy scalp. It absorbs excess oils on the scalp and helps to moisturize it when dry. You will just follow a simple procedure as outlined below:

  1. Start by adding 2 – 7 drops of peppermint oil into four ounces of cold water in a cup. Stir the mixture with a spoon.
  2. Pour the mixture onto your scalp and use your fingers or scalp massager to massage your scalp for a few minutes.
  3. Shampoo and make your hair the way you are used to.

Peppermint oil increases dermal thickness. It causes the rejuvenation and revitalization of skin on your scalp by increasing blood circulation and blood supply to skin cells. This is a spa-like treatment for your scalp using a natural product.

To minimize chances of side effects such as rashes and headaches, make sure you mix your oils well during preparation of your own peppermint oil. Also mix the oil properly with water before applying on your scalp. Diluting it with the water is really important.

Have any questions? Leave a comment below and we’ll answer.

How to Use Apple Cider Vinegar for Dandruff

Dandruff can often be an extreme inconvenience, if not a total embarrassment. We’ve all had that fear of having to go on a date and having white flakes falling off your scalp onto your plate, or going to a job interview with dandruff on the shoulders of your suit.

Or imagine having to study for an important exam while your head is so itchy!

Indeed, dandruff can have negative effects on your life in terms of confidence and your ability to function normally. While there are many over-the-counter solutions out there, natural remedies are always a better option because first and foremost, they’re cheaper. Second, the risk for side effects are typically lower.

One of the most recommended and effective ways to combat this issue is to use apple cider vinegar for dandruff. Simply apply an amount on your scalp and in a few days or weeks’ time, you’ll begin to see your dandruff problem slowly disappearing.

What is Apple Cider Vinegar and Why Is It Effective for Dandruff?

Apple cider vinegar is a type of vinegar made from cider. It can also be made from apple must. It is commonly used in marinades and as a salad dressing, as well as for food preservation.

It’s an effective dandruff remedy due to the powerful enzymes that are present in the acid of the vinegar that helps kill bacteria and fungus.

Contrary to popular belief that dandruff is caused by over-shampooing and other lifestyle reasons, dandruff is actually an overproduction of yeast on the scalp. Dead skin cells on the surface of the skin accumulate with more bacteria, leading to the cells flaking off and causing itchiness.

Dandruff also makes your hair lifeless and dull. So aside from unsightly white flakes that pepper your hair, they also make your locks look awful.

Apple Cider Vinegar is an anti-inflammatory and an anti-bacterial aid, which targets the cause of dandruff – the yeast and bacteria.

Tips for Using Apple Cider Vinegar to Fix Dandruff

Usage tips ACV

Here are a few things you should know before using apple cider vinegar for dandruff:

  • If your skin is highly sensitive, test a small area of your scalp first before you proceed with the entire treatment. Take a cotton ball, dip it in the vinegar, and apply a small amount on the base of your hairline.
  • If you develop rashes or some sort of allergy, then it’s best that you don’t use apple cider vinegar as you might be allergic. But if all is clear, then using the vinegar on your scalp is good to go.
  • You also have to make sure that you apply the vinegar in a well-ventilated area as its fumes are strong and can sting the eyes. You also have to use organic and undiluted apple cider vinegar – anything else might have other ingredients that may render it ineffective as treatment for your dandruff.

How to Use Apple Cider Vinegar to Fix Dandruff

Follow these steps for best results.

  • Wash your hair with mild shampoo and make sure it is free of any oil. Oil will make it difficult for the vinegar to penetrate rendering the treatment ineffective.
  • Mix 2 parts apple cider vinegar with one part warm water. You can add a few drops of lavender or rosemary to mask the vinegar’s strong odor once you apply the treatment to your hair.
  • Part your hair specifically on the areas where you have the most dandruff and pour the mixture directly. Let it sit for at least an hour, and rinse with warm water. Do not wash the vinegar off with shampoo.
  • For severe and stubborn dandruff, mix one part vinegar and one part water. Or you can also use the vinegar itself, with no added water.

Again, the vinegar’s odor is strong so if you can’t afford to smell like acid for the rest of the day, then mix it with water.

Another alternative would be to use a cotton ball, dip it in apple cider vinegar, and apply it only to the areas of your hair with the most amount of dandruff.

Apply the treatment once a week or twice a week for those who have severe dandruff problems. If symptoms persist or if your dandruff leads to open sores that bleed, it’s best you consult a doctor. If you’re looking for a particular type of vinegar, I’ve always used Bragg Organic brand, but I’m sure other ones would be suitable.

If you have any questions or comments, please leave a comment below!

Treating Keratosis Pilaris with Coconut Oil

Keratosis Pilaris, popularly abbreviated as KP, is a common follicular condition that is believed to be genetically predetermined. While it affects both men and women, it is more prevalent in women. The condition is characterized by uneven little bumps and lumps on the upper part of the arms, thighs, legs, and buttocks as well as the cheeks. It is often confused with ingrown hairs.

Treating Keratosis Pilaris can be relatively expensive depending on the method of treatment sought. However, there are ways of dealing with it that can be less expensive. Coconut oil is loaded with properties that give it the ability to reduce the intensity of Keratosis Pilaris and to treat the condition.

Results with coconut oil for keratosis pilaris are always mixed, so it’s important not to get your hopes up too much. The evidence is mostly anecdotal and it’s difficult to find scientific studies on the issue. That being said, you can certainly find plenty of people that personally claim that it helped them.

The Lauric acid properties in coconut oil happen to be the primary reason the oil is able to obstruct the hair follicles, thereby preventing the development of little uneven bulges. In addition, the oil boasts a wealth of antibacterial and anti-inflammatory properties that combine to reduce the effects brought by Keratosis Pilaris.

Keratosis Pilaris Treatment Plan

In order to give yourself the best chance of treating KP with coconut oil, you have to embark on the correct coconut oil treatment regimen as outlined below:

Exfoliate Using a Coconut Oil Scrub – Keratosis Pilaris primarily occurs because the hair follicles are not shedding, thus you need to get rid of this dead skin build up. Exfoliation ensures that the skin is clean and ready for treatment.

Mix the oil with sugar and use natural loofah to lather up the oil before cleaning the skin. A coconut oil scrub is excellent at exfoliating the skin because sugar contains natural glycolic acid that is good for KP.

Moisturize – After you have taken a shower, apply a small amount of coconut oil to your damp skin and rub it in using circular motions. Applying the oil on damp skin ensures maximum absorption.

Coconut oil has high fatty acids content that are easily absorbed by the skin to moisture it. In addition, the oil soothes the inflammation brought about by the lumps and bumps.

Apply a small amount of the oil because no matter how much you apply, the effects will still be the same. Repeat the above treatment plant at least three times every week and tangible results should be seen in a couple of weeks.

Important Tips When Using Coconut Oil to Treat Keratosis Pilaris

Avoid Harsh Chemicals – Keep off soap and lotions that are formulated using mineral oil, artificial fragrance, parabens, petroleum, and dimethicone. Be sure to check the ingredients on the coconut oil bottle before buying as well. Such products can interfere with the treatment plan and delay results.

Check Your Diet – Keep off trans fats that are commonly found in margarine and hydrogenated oil. Also, avoid gluten, wheat or dairy products if you are allergic to them because such foods can aggravate Keratosis Pilaris. Eat food with low glycemic index for improvement of KP.

Consider taking Supplements – Omega 3 or fish oil supplements are known to improve KP and you should take them on a regular basis. You may also consider supplementing unrefined coconut oil with virgin coconut oil by ingesting 1 to 3 tablespoons on a daily basis.

Coconut Oil Bath and Oil Recipes:

coconut oil

Coconut Oil Sugar Scrub – Mix one part of brown sugar with one part of white granulated sugar. Add two parts of extra virgin coconut oil to the sugar. You may add one tablespoon of honey to bring in the moisturizing properties into the mixture. Stir until the ingredients are evenly mixed. 

Whipped Coconut Oil Body Butter – Use a mixer or food processor to whip coconut oil into fluffy body butter. You may add shea or cocoa butter, liquid vitamin E and a few drops of essential oil into the mixer or processor before whipping.

Apple Cider Vinegar and Coconut Oil – Mix one part of coconut oil with one part of apple cider vinegar and a few drops of honey. Blend the ingredients to make a thick paste.


Keratosis Pilaris can be stressful, to say the least. However, you can get rid of the condition using coconut oil as highlighted above. The beauty of it is that coconut oil is readily available in almost every other beauty products outlet at relatively affordable prices. In addition, coconut oil bath recipes are easy to prepare at home.

If you have any questions, feel free to leave a comment below!